FIREROL Standard Wall Multicore Unscreened Cables

300/500 V or 0.6/1 kV EN 50264-2-2 (FRL-SW-05M/FRL-SW-1M)

FIREROL FRL-SW-05M/FRL-SW-1M

A. Conductor B. Insulation C. Sheath

Used as power and control cable for protected installations inside and outside of rail and transport vehicles,

where handling and installation cost are an important factor.

Used in control, auxillary and main circuit wiring such as cable harnesses, switchboards and control panels,

driver desks etc.

Conductor

flexible tinned annealed copper wires, stranded as per HD 383 (IEC 60228) class 5

Insulation

LSZH elastomeric compound as defined in EN 50264-1 (EI 101 to EI 105)

Outer sheath

LSZH elastomeric compound as defined in EN 50264-1 (EM 101 to EM 104)

Nominal Voltage:300/500 V or 0.6/1 kV

Maximum Conductor Temperature:+90 deg (fixed installation)

Minimum Permissible Ambient Temperature:-25/-40 deg (fixed installation)

Bending Radius:3 x Overall Diameter (D<12mm);

4 x Overall Diameter (D>12mm)

EN 60684-2:No fluorine

EN 50305; EN 60811-2-1:Resistance to mineral oil & fuel oil, acid & alkali

EN 50305:Resistance to ozone

EN 50306-2:Hazard levels HL1, HL2/HL3

DIN 5510-2:Protection level 1/2/3/4

BS 6853:Interior use 1a, 1b, II; Exterior use 1a, 1b, II

NF F 16-101:FO

EN54454-2:R15 Interior/ R16 Exterior HL1, HL2, HL3

EN 50265-2-1; IEC 60332-1-2; NF C 32-070 2.1 (C2)	Vertical flame propogation for a single insulated wire or cable
EN 50266-2-4 + EN 50305; IEC 60332-3-24; NF C 32-070 2.2 (C1); VDE 0472 Teil 804	Vertical flame spread of vertically mounted bunched wires or cables
EN 50268-2; IEC 61034-2; NF C 32-073 ; NF C 20-902; NF F 16 101; VDE 0472 Teil 816	Low Smoke Emission
EN 50267-2-1; IEC 60754-1; NF C 32-074;NF C 20-454; VDE 0472 Teil 815	Halogen Free
EN 50267-2-2/3; IEC 60754-2; NF C 32-074;NF C 20-453; VDE 0472 Teil 813	Low Corrosivity (Acidity & Conductivity)
EN 50305; NFX 70-100; NFF 63808; TM1-04; BS6853	Low Toxicity
NFF 16101; NFF 63808; BS6853	Smoke index
EN 45545-2	Requirement for fire behavior of matreial & components R15/R16

FRL-SW-05M 300/500 V

NUMBER AND NOMINAL CROSS SECTIONAL AREA (a)	COND UCTOR DIAM ETER (b)	MIN. MEAN THICK NESS OF INSUL ATION	DIAM ETER OF CORE (b)	MAX WIRE DIAM ETER OF SCREEN	MIN. MEAN THICKNESS OF SHEATH	OVERALL DIAMETER UNSREENED		WEI GHT	CONDUCTO RRESIS TANCE AT 20°C	INSUL ATION RESIS TANCE AT 20°C	INSUL ATION RESIS TANCE AT 50°C
										EI 105	EI 101- EI 104
						min	max		max	min	min
n x mm²	mm	mm	mm	mm	mm	mm	mm	kg/km	Ω/km	MΩ·km	MΩ·km
2x1	1.2	0.6	2.6	0.16	1.4	7.2	8.5	100	20.0	140	70
4x1	1.25	0.6	2.6	0.16	1.4	8.2	9.6	130	20.0	140	70
7x1		0.6	2.6	0.16	1.4	9.6	11.2	180	20.0	140	70
9x1		0.6	2.6	0.21	1.4	11.5	13.4	220	20.0	140	70
12x1		0.6	2.6	0.21	1.4	12.3	14.4	280	20.0	140	70
19x1		0.6	2.6	0.26	1.4	14.5	16.6	400	20.0	140	70
24x1		0.6	2.6	0.26	1.5	16.7	19.6	530	20.0	140	70
32x1		0.6	2.6	0.26	1.6	18.5	21.7	660	20.0	140	70
37x1		0.6	2.6	0.26	1.6	19.2	22.4	720	20.0	140	70
40x1		0.6	2.6	0.26	1.6	19.9	23.3	750	20.0	140	70
4x1.5	1.5	0.7	3.0	0.16	1.4	9.2	10.8	170	13.7	120	60
7x1.5		0.7	3.0	0.21	1.4	10.9	12.8	250	13.7	120	60
9x1.5		0.7	3.0	0.21	1.4	13.1	15.3	310	13.7	120	60
12x1.5		0.7	3.0	0.21	1.4	14.0	16.4	400	13.7	120	60
19x1.5		0.7	3.0	0.26	1.5	16.5	19.4	570	13.7	120	60
24x1.5		0.7	3.0	0.26	1.6	19.5	22.8	760	13.7	120	60
32x1.5		0.7	3.0	0.26	1.7	21.5	25.2	940	13.7	120	60
37x1.5		0.7	3.0	0.26	1.7	22.4	26.2	1040	13.7	120	60
4x2.5	1.95	0.8	3.7	0.21	1.4	10.7	12.5	240	8.21	90	45
7x2.5		0.8	3.7	0.21	1.4	12.7	14.9	360	8.21	90	45
9x2.5		0.8	3.7	0.26	1.5	15.6	18.3	450	8.21	90	45
12x2.5		0.8	3.7	0.26	1.5	16.7	19.6	590	8.21	90	45
19x2.5		0.8	3.7	0.26	1.6	19.7	23.1	860	8.21	90	45
24x2.5		0.8	3.7	0.26	1.8	23.5	27.5	1150	8.21	90	45

(a)= One earth conductor (green/yellow) can be included upon request

(b)= For information,indicative only

FRL-SW-1M 0.6/1 kV

NUMBER AND NOMINAL CROSS SECTIONAL AREA (a)	COND UCTOR DIAM ETER (b)	MIN. MEAN THICK NESS OF INSUL ATION	DIAM ETER OF CORE (b)	MAX WIRE DIAM ETER OF SCREEN	MIN. MEAN THICKNESS OF SHEATH	OVERALL DIAMETER UNSREENED		WEI GHT	CONDUCTO RRESIS TANCE AT 20°C	INSUL ATION RESIS TANCE AT 20°C	INSUL ATION RESIS TANCE AT 50°C
						min	max		max	min	min
n x mm²	mm	mm	mm	mm	mm	mm	mm	Kg/km	mm	Ω/km	MΩ·km
TWO CORES
1.5	1.5	0.8	3.0	3.5	1.4	8.5	9.9	140	13.7	150	75
2.5	1.95	0.8	3.4	3.9	1.4	9.3	10.9	180	8.21	130	65
4	2.5	0.8	3.9	4.6	1.4	10.3	12.1	230	5.09	110	55
6	3.0	0.9	4.6	5.4	1.4	11.8	13.9	300	3.39	90	45
10	3.9	1.1	5.8	6.8	1.4	14.3	16.7	480	1.95	85	45
16	5.0	1.1	7.2	8.5	1.5	16.5	19.4	630	1.24	70	35
25	6.4	1.3	8.6	10.0	1.6	20.1	23.5	920	0.795	65	35
35	7.7	1.3	10.2	11.5	1.7	22.7	26.6	1200	0.565	60	30
50	9.2	1.5	11.6	13.5	1.9	26.7	31.2	1670	0.393	55	30
THREE CORES
1.5	1.5	0.8	3.0	3.5	1.4	8.9	10.5	160	13.7	150	75
2.5	1.95	0.8	3.4	3.9	1.4	9.9	11.6	210	8.21	130	65
4	2.5	0.8	3.9	4.6	1.4	11.0	12.9	270	5.09	110	55
6	3.0	0.9	4.6	5.4	1.4	12.5	14.6	360	3.39	90	45
10	3.9	1.1	5.8	6.8	1.5	15.3	17.9	600	1.95	85	45
16	5.0	1.1	7.2	8.5	1.6	17.8	20.8	790	1.24	70	35
25	6.4	1.3	8.6	10.0	1.7	21.6	25.3	1170	0.795	65	35
35	7.7	1.3	10.2	11.5	1.8	24.4	28.6	1530	0.565	60	30
50	9.2	1.5	11.6	13.5	1.9	28.2	33.3	2120	0.393	55	30
FOUR CORES
1.5	1.5	0.8	3.0	3.5	1.4	9.7	11.3	190	13.7	150	75
2.5	1.95	0.8	3.4	3.9	1.4	10.7	12.5	250	8.21	130	65
4	2.5	0.8	3.9	4.6	1.4	11.9	14.0	330	5.09	110	55
6	3.0	0.9	4.6	5.4	1.4	13.7	16.1	450	3.39	90	45
10	3.9	1.1	5.8	6.8	1.5	16.9	19.8	740	1.95	85	45
16	5.0	1.1	7.2	8.5	1.6	19.6	22.9	980	1.24	70	35
25	6.4	1.3	8.6	10.0	1.8	24.1	28.2	1460	0.795	65	35
3X35+25	7.7/6.4	1.3/1.3	10.2 /8.6	11.5 /10.0	1.9	28.5	34.2	1610	0.565/0.795	60	30
3X50+25	9.2/6.4	1.5/1.3	11.6 /8.6	13.5 /10.0	2.0	33.4	40.0	2230	0.393/0.795	55	30

(a)= For information,indicative only